Dear Customer,
  Please follow these steps to update your system BIOS:
1.Make a DOS boot diskette with NO autoexec.bat and config.sys files.
2.Visit our web site to download refresh tool and system BIOS image file.  
3.Copy the PHLASH.EXE, PLATFORM.BIN, and system BIOS image file(*.rom) to 
  this diskette. 
4.Turn the system off, then boot the system using the boot diskette you just
  created. 
5.Type "phlash [image file name]" and press [ENTER]. 
6.It will now update the flash BIOS. If flash memory has been successfully 
  programmed, it will ask you to power off the system. Please press any key 
  to turn off your system. IF the system does not turn off, turn the power 
  off, then on. 
7.Assuming that you have successfully flashed the BIOS. After the system 
  reboots, hit [F2] to enter the CMOS Setup. At this point, go to "Load Setup
  Defaults" field at "Exit" sub-menu. Then save and exit Setup. 

  Please follow these steps to update your keyboard BIOS:
1.Make a DOS boot diskette with NO autoexec.bat and config.sys files.
2.Visit our web site to download refresh tool and keyboard BIOS image file.
3.Copy the PHF.EXE, and keyboard BIOS image file to this diskette.
4.Turn the system off, then boot the system using the boot diskette you just 
  created. 
5.Type "phf [image file name]" and press [ENTER]. 
6.It will now update the keyboard BIOS. If flash memory has been successfully
  programmed, it will ask you to power off the system. Please press any key 
  to turn off your system. IF the system does not turn off, turn the power off, 
  then on. 
7.Assuming that you have successfully flashed the BIOS. After the system 
  reboots, hit [F2] to enter the CMOS Setup. At this point, go to "Load Setup 
  Defaults" field at "Exit" sub-menu. Then save and exit Setup. 